A neat idea to get this look without might be to use wide masking tape and make hole punches with a lattice paper punch like this one from Michaels or this one. Press the tape onto the glass until no gaps are showing. Then spray with silver high-heat spray paint. The light will shine the pattern onto the walls. Use a very low wattage bulb like 40 or less AND be absolutely sure to paint with high heat spray paint. Like this one at The Home Depot. Image Source.Lovely Lightbulbs
September 10, 2012
A neat idea to get this look without might be to use wide masking tape and make hole punches with a lattice paper punch like this one from Michaels or this one. Press the tape onto the glass until no gaps are showing. Then spray with silver high-heat spray paint. The light will shine the pattern onto the walls. Use a very low wattage bulb like 40 or less AND be absolutely sure to paint with high heat spray paint. Like this one at The Home Depot. Image Source.
|
Subscribe to:
Post Comments (Atom)
Like not spending money? 
2 {comments}:
Hi, it seems that the original picture comes from a British store on-line called Plumo, but it is not available anymore.
http://www.plumo.com/categories/House/
It seems that pinterest saves the picture even when the original source deleted, and the link too.
@romyThank you! I just added:)
Post a Comment